Finish support for a fake cursor

Better support for fake cursor
Remove no longer necessary terminfo package
2026-04-01 15:47:12 +09:00 · 2020-01-01 22:40:51 -05:00 · 2020-01-01 21:29:18 -05:00 · 2020-01-01 20:58:01 -05:00 · 2020-01-01 20:47:05 -05:00 · 2020-01-01 20:44:45 -05:00
21 changed files with 360 additions and 1713 deletions
--- a/11
+++ b/11
@@ -12,12 +12,9 @@ GOVARS = -X github.com/zyedidia/micro/internal/util.Version=$(VERSION) -X github

 # Builds micro after checking dependencies but without updating the runtime
 build:
-	go build -mod=readonly -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro
+	go build -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro

 build-dbg:
-	go build -mod=readonly -ldflags "-s -w $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro
-
-build-mod:
 	go build -ldflags "-s -w $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro

 # Builds micro after building the runtime and checking dependencies
@@ -25,18 +22,18 @@ build-all: runtime build

 # Builds micro without checking for dependencies
 build-quick:
-	go build -mod=readonly -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro
+	go build -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro

 # Same as 'build' but installs to $GOBIN afterward
 install:
-	go install -mod=readonly -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro
+	go install -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)" ./cmd/micro

 # Same as 'build-all' but installs to $GOBIN afterward
 install-all: runtime install

 # Same as 'build-quick' but installs to $GOBIN afterward
 install-quick:
-	go install -mod=readonly -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)"  ./cmd/micro
+	go install -ldflags "-s -w $(GOVARS) $(ADDITIONAL_GO_LINKER_FLAGS)"  ./cmd/micro

 # Builds the runtime
 runtime:
--- a/README.md
+++ b/README.md
@@ -134,19 +134,21 @@ pkg_add -v micro

 If your operating system does not have a binary release, but does run Go, you can build from source.

-Make sure that you have Go version 1.5 or greater (Go 1.4 will work if your version supports CGO) and that your `GOPATH` env variable is set (I recommend setting it to `~/go` if you don't have one).
+Make sure that you have Go version 1.11 or greater and Go modules are enabled.

 ```
-go get -d github.com/zyedidia/micro/cmd/micro
-cd $GOPATH/src/github.com/zyedidia/micro
-make install
+git clone https://github.com/zyedidia/micro
+cd micro
+make build
+sudo mv micro /usr/local/bin # optional
 ```

-The binary will then be installed to `$GOPATH/bin` (or your `$GOBIN`).
+The binary will be placed in the current directory and can be moved to
+anywhere you like (for example `/usr/local/bin`).

-Please make sure that when you are working with micro's code, you are working on your `GOPATH`.
+The command `make install` will install the binary to `$GOPATH/bin` or `$GOBIN`.

-You can install directly with `go get` (`go get -u github.com/zyedidia/micro/cmd/micro`) but this isn't recommended because it doesn't build micro with version information which is useful for the plugin manager.
+You can install directly with `go get` (`go get -u github.com/zyedidia/micro/cmd/micro`) but this isn't recommended because it doesn't build micro with version information.

 ### MacOS terminal

--- a/go.mod
+++ b/go.mod
@@ -3,21 +3,23 @@ module github.com/zyedidia/micro
 require (
 	github.com/blang/semver v3.5.1+incompatible
 	github.com/dustin/go-humanize v1.0.0
-	github.com/flynn/json5 v0.0.0-20160717195620-7620272ed633
-	github.com/gdamore/tcell v1.3.0
 	github.com/go-errors/errors v1.0.1
 	github.com/mattn/go-isatty v0.0.11
 	github.com/mattn/go-runewidth v0.0.7
 	github.com/mitchellh/go-homedir v1.1.0
 	github.com/sergi/go-diff v1.1.0
+	github.com/stretchr/testify v1.4.0
 	github.com/yuin/gopher-lua v0.0.0-20191220021717-ab39c6098bdb
 	github.com/zyedidia/clipboard v0.0.0-20190823154308-241f98e9b197
 	github.com/zyedidia/glob v0.0.0-20170209203856-dd4023a66dc3
-	github.com/zyedidia/poller v0.0.0-20170616160828-ab09682913b7 // indirect
+	github.com/zyedidia/highlight v0.0.0-20170330143449-201131ce5cf5
+	github.com/zyedidia/json5 v0.0.0-20200102012142-2da050b1a98d
 	github.com/zyedidia/pty v2.0.0+incompatible // indirect
-	github.com/zyedidia/tcell v0.0.0-20200101033337-8f44670b0885
+	github.com/zyedidia/tcell v1.4.0
 	github.com/zyedidia/terminal v0.0.0-20180726154117-533c623e2415
 	golang.org/x/text v0.3.2
 	gopkg.in/yaml.v2 v2.2.7
 	layeh.com/gopher-luar v1.0.7
 )
+
+go 1.11
--- a/go.sum
+++ b/go.sum
@@ -1,38 +1,37 @@
-github.com/DATA-DOG/go-sqlmock v1.3.3/go.mod h1:f/Ixk793poVmq4qj/V1dPUg2JEAKC73Q5eFN3EC/SaM=
 github.com/blang/semver v3.5.1+incompatible h1:cQNTCjp13qL8KC3Nbxr/y2Bqb63oX6wdnnjpJbkM4JQ=
 github.com/blang/semver v3.5.1+incompatible/go.mod h1:kRBLl5iJ+tD4TcOOxsy/0fnwebNt5EWlYSAyrTnjyyk=
 github.com/chzyer/logex v1.1.10/go.mod h1:+Ywpsq7O8HXn0nuIou7OrIPyXbp3wmkHB+jjWRnGsAI=
 github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e/go.mod h1:nSuG5e5PlCu98SY8svDHJxuZscDgtXS6KTTbou5AhLI=
 github.com/chzyer/test v0.0.0-20180213035817-a1ea475d72b1/go.mod h1:Q3SI9o4m/ZMnBNeIyt5eFwwo7qiLfzFZmjNmxjkiQlU=
 github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/dustin/go-humanize v1.0.0 h1:VSnTsYCnlFHaM2/igO1h6X3HA71jcobQuxemgkq4zYo=
 github.com/dustin/go-humanize v1.0.0/go.mod h1:HtrtbFcZ19U5GC7JDqmcUSB87Iq5E25KnS6fMYU6eOk=
-github.com/flynn/json5 v0.0.0-20160717195620-7620272ed633 h1:xJMmr4GMYIbALX5edyoDIOQpc2bOQTeJiWMeCl9lX/8=
-github.com/flynn/json5 v0.0.0-20160717195620-7620272ed633/go.mod h1:NJDK3/o7abx6PP54EOe0G0n0RLmhCo9xv61gUYpI0EY=
 github.com/gdamore/encoding v1.0.0 h1:+7OoQ1Bc6eTm5niUzBa0Ctsh6JbMW6Ra+YNuAtDBdko=
 github.com/gdamore/encoding v1.0.0/go.mod h1:alR0ol34c49FCSBLjhosxzcPHQbf2trDkoo5dl+VrEg=
-github.com/gdamore/tcell v1.3.0 h1:r35w0JBADPZCVQijYebl6YMWWtHRqVEGt7kL2eBADRM=
-github.com/gdamore/tcell v1.3.0/go.mod h1:Hjvr+Ofd+gLglo7RYKxxnzCBmev3BzsS67MebKS4zMM=
 github.com/go-errors/errors v1.0.1 h1:LUHzmkK3GUKUrL/1gfBUxAHzcev3apQlezX/+O7ma6w=
 github.com/go-errors/errors v1.0.1/go.mod h1:f4zRHt4oKfwPJE5k8C9vpYG+aDHdBFUsgrm6/TyX73Q=
+github.com/kr/pretty v0.1.0 h1:L/CwN0zerZDmRFUapSPitk6f+Q3+0za1rQkzVuMiMFI=
 github.com/kr/pretty v0.1.0/go.mod h1:dAy3ld7l9f0ibDNOQOHHMYYIIbhfbHSm3C4ZsoJORNo=
 github.com/kr/pty v1.1.1/go.mod h1:pFQYn66WHrOpPYNljwOMqo10TkYh1fy3cYio2l3bCsQ=
+github.com/kr/text v0.1.0 h1:45sCR5RtlFHMR4UwH9sdQ5TC8v0qDQCHnXt+kaKSTVE=
 github.com/kr/text v0.1.0/go.mod h1:4Jbv+DJW3UT/LiOwJeYQe1efqtUx/iVham/4vfdArNI=
-github.com/lucasb-eyer/go-colorful v1.0.2/go.mod h1:0MS4r+7BZKSJ5mw4/S5MPN+qHFF1fYclkSPilDOKW0s=
 github.com/lucasb-eyer/go-colorful v1.0.3 h1:QIbQXiugsb+q10B+MI+7DI1oQLdmnep86tWFlaaUAac=
 github.com/lucasb-eyer/go-colorful v1.0.3/go.mod h1:R4dSotOR9KMtayYi1e77YzuveK+i7ruzyGqttikkLy0=
 github.com/mattn/go-isatty v0.0.11 h1:FxPOTFNqGkuDUGi3H/qkUbQO4ZiBa2brKq5r0l8TGeM=
 github.com/mattn/go-isatty v0.0.11/go.mod h1:PhnuNfih5lzO57/f3n+odYbM4JtupLOxQOAqxQCu2WE=
-github.com/mattn/go-runewidth v0.0.4/go.mod h1:LwmH8dsx7+W8Uxz3IHJYH5QSwggIsqBzpuz5H//U1FU=
 github.com/mattn/go-runewidth v0.0.7 h1:Ei8KR0497xHyKJPAv59M1dkC+rOZCMBJ+t3fZ+twI54=
 github.com/mattn/go-runewidth v0.0.7/go.mod h1:H031xJmbD/WCDINGzjvQ9THkh0rPKHF+m2gUSrubnMI=
 github.com/mitchellh/go-homedir v1.1.0 h1:lukF9ziXFxDFPkA1vsr5zpc1XuPDn/wFntq5mG+4E0Y=
 github.com/mitchellh/go-homedir v1.1.0/go.mod h1:SfyaCUpYCn1Vlf4IUYiD9fPX4A5wJrkLzIz1N1q0pr0=
+github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
 github.com/sergi/go-diff v1.1.0 h1:we8PVUC3FE2uYfodKH/nBHMSetSfHDR6scGdBi+erh0=
 github.com/sergi/go-diff v1.1.0/go.mod h1:STckp+ISIX8hZLjrqAeVduY0gWCT9IjLuqbuNXdaHfM=
+github.com/stretchr/objx v0.1.0 h1:4G4v2dO3VZwixGIRoQ5Lfboy6nUhCyYzaqnIAPPhYs4=
 github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/testify v1.4.0 h1:2E4SXV/wtOkTonXsotYi4li6zVWxYlZuYNCXe9XRJyk=
 github.com/stretchr/testify v1.4.0/go.mod h1:j7eGeouHqKxXV5pUuKE4zz7dFj8WfuZ+81PSLYec5m4=
 github.com/yuin/gopher-lua v0.0.0-20190206043414-8bfc7677f583/go.mod h1:gqRgreBUhTSL0GeU64rtZ3Uq3wtjOa/TB2YfrtkCbVQ=
 github.com/yuin/gopher-lua v0.0.0-20191220021717-ab39c6098bdb h1:ZkM6LRnq40pR1Ox0hTHlnpkcOTuFIDQpZ1IN8rKKhX0=
@@ -41,26 +40,16 @@ github.com/zyedidia/clipboard v0.0.0-20190823154308-241f98e9b197 h1:gYTNnAW6azuB
 github.com/zyedidia/clipboard v0.0.0-20190823154308-241f98e9b197/go.mod h1:WDk3p8GiZV9+xFWlSo8qreeoLhW6Ik692rqXk+cNeRY=
 github.com/zyedidia/glob v0.0.0-20170209203856-dd4023a66dc3 h1:oMHjjTLfGXVuyOQBYj5/td9WC0mw4g1xDBPovIqmHew=
 github.com/zyedidia/glob v0.0.0-20170209203856-dd4023a66dc3/go.mod h1:YKbIYP//Eln8eDgAJGI3IDvR3s4Tv9Z9TGIOumiyQ5c=
-github.com/zyedidia/poller v0.0.0-20170616160828-ab09682913b7 h1:G2kKl91VH6VynNSOqOPL9E58iFHWIamXp+feOi7KOyo=
-github.com/zyedidia/poller v0.0.0-20170616160828-ab09682913b7/go.mod h1:vZXJOHGDcuK08GXhF6IAY0ZFd2WcgOR5DOTp84Uk5eE=
-github.com/zyedidia/poller v2.0.0+incompatible h1:DMOvB0EXz2JTokqOKfxPWN/8xXFJbO+m4vNhMkOY7Lo=
-github.com/zyedidia/poller v2.0.0+incompatible/go.mod h1:vZXJOHGDcuK08GXhF6IAY0ZFd2WcgOR5DOTp84Uk5eE=
-github.com/zyedidia/pty v1.1.1 h1:SGOF3egDZGCGbpB5DPlg+yabbAuVkUtXVeNTDFeEytM=
-github.com/zyedidia/pty v1.1.1/go.mod h1:4y9l9yJZNxRa7GB/fB+mmDmGkG3CqmzLf4vUxGGotEA=
+github.com/zyedidia/highlight v0.0.0-20170330143449-201131ce5cf5 h1:Zs6mpwXvlqpF9zHl5XaN0p5V4J9XvP+WBuiuXyIgqvc=
+github.com/zyedidia/highlight v0.0.0-20170330143449-201131ce5cf5/go.mod h1:c1r+Ob9tUTPB0FKWO1+x+Hsc/zNa45WdGq7Y38Ybip0=
+github.com/zyedidia/json5 v0.0.0-20200102012142-2da050b1a98d h1:zmDMkh22zXOB7gz8jFaI4GpI7llsPgzm38/jG0UgxjE=
+github.com/zyedidia/json5 v0.0.0-20200102012142-2da050b1a98d/go.mod h1:NDJSTTYWivnza6zkRapeX2/LwhKPEMQ7bJxqgDVT78I=
+github.com/zyedidia/poller v1.0.1 h1:Tt9S3AxAjXwWGNiC2TUdRJkQDZSzCBNVQ4xXiQ7440s=
+github.com/zyedidia/poller v1.0.1/go.mod h1:vZXJOHGDcuK08GXhF6IAY0ZFd2WcgOR5DOTp84Uk5eE=
 github.com/zyedidia/pty v2.0.0+incompatible h1:Ou5vXL6tvjst+RV8sUFISbuKDnUJPhnpygApMFGweqw=
 github.com/zyedidia/pty v2.0.0+incompatible/go.mod h1:4y9l9yJZNxRa7GB/fB+mmDmGkG3CqmzLf4vUxGGotEA=
-github.com/zyedidia/tcell v0.0.0-20191219170756-59b50b23fa9b h1:cryFENlMxJJrkimVx/CUMFDCxC4vpmey2x3A3tAgTNM=
-github.com/zyedidia/tcell v0.0.0-20191219170756-59b50b23fa9b/go.mod h1:yXgdp23+aW8OMENYVBvpKoeiBtjaVWJ9HhpPDu6LBfM=
-github.com/zyedidia/tcell v0.0.0-20191227234059-2c574ec1b972 h1:tqsPH3tvIF9LQMWQODln09mJEV1ZlwC1qc5dTplj+eI=
-github.com/zyedidia/tcell v0.0.0-20191227234059-2c574ec1b972/go.mod h1:yXgdp23+aW8OMENYVBvpKoeiBtjaVWJ9HhpPDu6LBfM=
-github.com/zyedidia/tcell v0.0.0-20191228235154-5b9bbc0d56c7 h1:Qw5255OIirY741L/Kt5KLitfzfhpk29x+A193zByTS0=
-github.com/zyedidia/tcell v0.0.0-20191228235154-5b9bbc0d56c7/go.mod h1:yXgdp23+aW8OMENYVBvpKoeiBtjaVWJ9HhpPDu6LBfM=
-github.com/zyedidia/tcell v0.0.0-20200101010555-3d6f590fde0b h1:WOYC0HHwRKNvDcvVbm5QXfjD+uoBvnqqSxRdjlsXIq0=
-github.com/zyedidia/tcell v0.0.0-20200101010555-3d6f590fde0b/go.mod h1:b7qO+6WpCTSDPZ3ru7R2FNZeEtcNpo+X8m+5Py0/l64=
-github.com/zyedidia/tcell v0.0.0-20200101030217-abaa2102dece h1:Qj15gTpYWVtGA9K7LFkiuBbk5BjMfJJZhrw3e+zKI2k=
-github.com/zyedidia/tcell v0.0.0-20200101030217-abaa2102dece/go.mod h1:b7qO+6WpCTSDPZ3ru7R2FNZeEtcNpo+X8m+5Py0/l64=
-github.com/zyedidia/tcell v0.0.0-20200101033337-8f44670b0885 h1:BB7VLUCQCQm7vQYrePdVzoCtbacfdiHfGJ7NzkoEYeA=
-github.com/zyedidia/tcell v0.0.0-20200101033337-8f44670b0885/go.mod h1:b7qO+6WpCTSDPZ3ru7R2FNZeEtcNpo+X8m+5Py0/l64=
+github.com/zyedidia/tcell v1.4.0 h1:uhAz+bdB3HHlVP2hff3WURkI+pERNwgVfy27oi1Gb2A=
+github.com/zyedidia/tcell v1.4.0/go.mod h1:HhlbMSCcGX15rFDB+Q1Lk3pKEOocsCUAQC3zhZ9sadA=
 github.com/zyedidia/terminal v0.0.0-20180726154117-533c623e2415 h1:752dTQ5OatJ9M5ULK2+9lor+nzyZz+LYDo3WGngg3Rc=
 github.com/zyedidia/terminal v0.0.0-20180726154117-533c623e2415/go.mod h1:8leT8G0Cm8NoJHdrrKHyR9MirWoF4YW7pZh06B6H+1E=
 golang.org/x/sys v0.0.0-20190204203706-41f3e6584952/go.mod h1:STP8DvDyc/dI5b8T5hshtkjS+E42TnysNCUPdjciGhY=
@@ -72,6 +61,7 @@ golang.org/x/text v0.3.2 h1:tW2bmiBqwgJj/UpqtC8EpXEZVYOwU0yG4iWbprSVAcs=
 golang.org/x/text v0.3.2/go.mod h1:bEr9sfX3Q8Zfm5fL9x+3itogRgK3+ptLWKqgva+5dAk=
 golang.org/x/tools v0.0.0-20180917221912-90fa682c2a6e/go.mod h1:n7NCudcB/nEzxVGmLbDWY5pfWTLqBcC2KZ6jyYvM4mQ=
 gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 h1:YR8cESwS4TdDjEe65xsg0ogRM/Nc3DYOhEAlW+xobZo=
 gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
 gopkg.in/yaml.v2 v2.2.2/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
 gopkg.in/yaml.v2 v2.2.4/go.mod h1:hI93XBmqTisBFMUTm0b8Fm+jr3Dg1NNxqwp+5A1VGuI=
--- a/internal/action/bindings.go
+++ b/internal/action/bindings.go
@@ -8,7 +8,7 @@ import (
 	"strings"
 	"unicode"

-	"github.com/flynn/json5"
+	"github.com/zyedidia/json5"
 	"github.com/zyedidia/micro/internal/config"
 	"github.com/zyedidia/micro/internal/screen"
 	"github.com/zyedidia/tcell"
--- a/internal/config/runtime.go
+++ b/internal/config/runtime.go
--- a/internal/config/settings.go
+++ b/internal/config/settings.go
@@ -9,8 +9,8 @@ import (
 	"strconv"
 	"strings"

-	"github.com/flynn/json5"
 	"github.com/zyedidia/glob"
+	"github.com/zyedidia/json5"
 	"github.com/zyedidia/micro/internal/util"
 	"golang.org/x/text/encoding/htmlindex"
 )
--- a/internal/display/bufwindow.go
+++ b/internal/display/bufwindow.go
@@ -4,12 +4,12 @@ import (
 	"strconv"
 	"unicode/utf8"

-	"github.com/zyedidia/tcell"
 	runewidth "github.com/mattn/go-runewidth"
 	"github.com/zyedidia/micro/internal/buffer"
 	"github.com/zyedidia/micro/internal/config"
 	"github.com/zyedidia/micro/internal/screen"
 	"github.com/zyedidia/micro/internal/util"
+	"github.com/zyedidia/tcell"
 )

 // The BufWindow provides a way of displaying a certain section
@@ -102,7 +102,7 @@ func (w *BufWindow) getStartInfo(n, lineN int) ([]byte, int, int, *tcell.Style)
 func (w *BufWindow) Clear() {
 	for y := 0; y < w.Height; y++ {
 		for x := 0; x < w.Width; x++ {
-			screen.Screen.SetContent(w.X+x, w.Y+y, ' ', nil, config.DefStyle)
+			screen.SetContent(w.X+x, w.Y+y, ' ', nil, config.DefStyle)
 		}
 	}
 }
@@ -298,9 +298,9 @@ func (w *BufWindow) drawGutter(vloc *buffer.Loc, bloc *buffer.Loc) {
 			break
 		}
 	}
-	screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, char, nil, s)
+	screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, char, nil, s)
 	vloc.X++
-	screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, char, nil, s)
+	screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, char, nil, s)
 	vloc.X++
 }

@@ -309,21 +309,21 @@ func (w *BufWindow) drawLineNum(lineNumStyle tcell.Style, softwrapped bool, maxL

 	// Write the spaces before the line number if necessary
 	for i := 0; i < maxLineNumLength-len(lineNum); i++ {
-		screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
+		screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
 		vloc.X++
 	}
 	// Write the actual line number
 	for _, ch := range lineNum {
 		if softwrapped {
-			screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
+			screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
 		} else {
-			screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ch, nil, lineNumStyle)
+			screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ch, nil, lineNumStyle)
 		}
 		vloc.X++
 	}

 	// Write the extra space
-	screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
+	screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, ' ', nil, lineNumStyle)
 	vloc.X++
 }

@@ -340,10 +340,9 @@ func (w *BufWindow) getStyle(style tcell.Style, bloc buffer.Loc, r rune) (tcell.
 func (w *BufWindow) showCursor(x, y int, main bool) {
 	if w.active {
 		if main {
-			screen.Screen.ShowCursor(x, y)
+			screen.ShowCursor(x, y)
 		} else {
-			r, _, _, _ := screen.Screen.GetContent(x, y)
-			screen.Screen.SetContent(x, y, r, nil, config.DefStyle.Reverse(true))
+			screen.ShowFakeCursorMulti(x, y)
 		}
 	}
 }
@@ -514,7 +513,7 @@ func (w *BufWindow) displayBuffer() {
 					}
 				}

-				screen.Screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, r, nil, style)
+				screen.SetContent(w.X+vloc.X, w.Y+vloc.Y, r, nil, style)

 				if showcursor {
 					for _, c := range cursors {
@@ -592,16 +591,10 @@ func (w *BufWindow) displayBuffer() {
 					curStyle = style.Background(fg)
 				}
 			}
-			screen.Screen.SetContent(i+w.X, vloc.Y+w.Y, ' ', nil, curStyle)
+			screen.SetContent(i+w.X, vloc.Y+w.Y, ' ', nil, curStyle)
 		}

-		for _, c := range cursors {
-			if c.X == bloc.X && c.Y == bloc.Y && !c.HasSelection() {
-				w.showCursor(w.X+vloc.X, w.Y+vloc.Y, c.Num == 0)
-			}
-		}
-
-		draw(' ', curStyle, false)
+		draw(' ', curStyle, true)

 		bloc.X = w.StartCol
 		bloc.Y++
@@ -624,7 +617,7 @@ func (w *BufWindow) displayStatusLine() {
 	} else if w.Y+w.Height != infoY {
 		w.drawStatus = true
 		for x := w.X; x < w.X+w.Width; x++ {
-			screen.Screen.SetContent(x, w.Y+w.Height-1, '-', nil, config.DefStyle.Reverse(true))
+			screen.SetContent(x, w.Y+w.Height-1, '-', nil, config.DefStyle.Reverse(true))
 		}
 	} else {
 		w.drawStatus = false
@@ -644,7 +637,7 @@ func (w *BufWindow) displayScrollBar() {
 		}
 		barstart := w.Y + int(float64(w.StartLine)/float64(w.Buf.LinesNum())*float64(w.Height))
 		for y := barstart; y < util.Min(barstart+barsize, w.Y+bufHeight); y++ {
-			screen.Screen.SetContent(scrollX, y, '|', nil, config.DefStyle.Reverse(true))
+			screen.SetContent(scrollX, y, '|', nil, config.DefStyle.Reverse(true))
 		}
 	}
 }
--- a/internal/display/infowindow.go
+++ b/internal/display/infowindow.go
@@ -74,7 +74,7 @@ func (i *InfoWindow) LocFromVisual(vloc buffer.Loc) buffer.Loc {

 func (i *InfoWindow) Clear() {
 	for x := 0; x < i.Width; x++ {
-		screen.Screen.SetContent(x, i.Y, ' ', nil, i.defStyle())
+		screen.SetContent(x, i.Y, ' ', nil, i.defStyle())
 	}
 }

@@ -111,7 +111,7 @@ func (i *InfoWindow) displayBuffer() {
 				if j > 0 {
 					c = ' '
 				}
-				screen.Screen.SetContent(vlocX, i.Y, c, nil, style)
+				screen.SetContent(vlocX, i.Y, c, nil, style)
 			}
 			vlocX++
 		}
@@ -121,7 +121,7 @@ func (i *InfoWindow) displayBuffer() {
 	totalwidth := blocX - nColsBeforeStart
 	for len(line) > 0 {
 		if activeC.X == blocX {
-			screen.Screen.ShowCursor(vlocX, i.Y)
+			screen.ShowCursor(vlocX, i.Y)
 		}

 		r, size := utf8.DecodeRune(line)
@@ -155,7 +155,7 @@ func (i *InfoWindow) displayBuffer() {
 		}
 	}
 	if activeC.X == blocX {
-		screen.Screen.ShowCursor(vlocX, i.Y)
+		screen.ShowCursor(vlocX, i.Y)
 	}
 }

@@ -167,9 +167,9 @@ func (i *InfoWindow) displayKeyMenu() {
 	for y := 0; y < len(keydisplay); y++ {
 		for x := 0; x < i.Width; x++ {
 			if x < len(keydisplay[y]) {
-				screen.Screen.SetContent(x, i.Y-len(keydisplay)+y, rune(keydisplay[y][x]), nil, i.defStyle())
+				screen.SetContent(x, i.Y-len(keydisplay)+y, rune(keydisplay[y][x]), nil, i.defStyle())
 			} else {
-				screen.Screen.SetContent(x, i.Y-len(keydisplay)+y, ' ', nil, i.defStyle())
+				screen.SetContent(x, i.Y-len(keydisplay)+y, ' ', nil, i.defStyle())
 			}
 		}
 	}
@@ -194,7 +194,7 @@ func (i *InfoWindow) Display() {

 		display := i.Msg
 		for _, c := range display {
-			screen.Screen.SetContent(x, i.Y, c, nil, style)
+			screen.SetContent(x, i.Y, c, nil, style)
 			x += runewidth.RuneWidth(c)
 		}

@@ -219,13 +219,13 @@ func (i *InfoWindow) Display() {
 				style = style.Reverse(true)
 			}
 			for _, r := range s {
-				screen.Screen.SetContent(x, i.Y-keymenuOffset-1, r, nil, style)
+				screen.SetContent(x, i.Y-keymenuOffset-1, r, nil, style)
 				x++
 				if x >= i.Width {
 					return
 				}
 			}
-			screen.Screen.SetContent(x, i.Y-keymenuOffset-1, ' ', nil, statusLineStyle)
+			screen.SetContent(x, i.Y-keymenuOffset-1, ' ', nil, statusLineStyle)
 			x++
 			if x >= i.Width {
 				return
@@ -233,7 +233,7 @@ func (i *InfoWindow) Display() {
 		}

 		for x < i.Width {
-			screen.Screen.SetContent(x, i.Y-keymenuOffset-1, ' ', nil, statusLineStyle)
+			screen.SetContent(x, i.Y-keymenuOffset-1, ' ', nil, statusLineStyle)
 			x++
 		}
 	}
--- a/internal/display/statusline.go
+++ b/internal/display/statusline.go
@@ -118,13 +118,13 @@ func (s *StatusLine) Display() {
 				style = style.Reverse(true)
 			}
 			for _, r := range sug {
-				screen.Screen.SetContent(x, y-keymenuOffset, r, nil, style)
+				screen.SetContent(x, y-keymenuOffset, r, nil, style)
 				x++
 				if x >= s.win.Width {
 					return
 				}
 			}
-			screen.Screen.SetContent(x, y-keymenuOffset, ' ', nil, statusLineStyle)
+			screen.SetContent(x, y-keymenuOffset, ' ', nil, statusLineStyle)
 			x++
 			if x >= s.win.Width {
 				return
@@ -132,7 +132,7 @@ func (s *StatusLine) Display() {
 		}

 		for x < s.win.Width {
-			screen.Screen.SetContent(x, y-keymenuOffset, ' ', nil, statusLineStyle)
+			screen.SetContent(x, y-keymenuOffset, ' ', nil, statusLineStyle)
 			x++
 		}
 		return
@@ -184,7 +184,7 @@ func (s *StatusLine) Display() {
 					c = ' '
 					x++
 				}
-				screen.Screen.SetContent(winX+x, y, c, nil, statusLineStyle)
+				screen.SetContent(winX+x, y, c, nil, statusLineStyle)
 			}
 		} else if x >= s.win.Width-rightLen && x < rightLen+s.win.Width-rightLen {
 			r, size := utf8.DecodeRune(rightText)
@@ -196,10 +196,10 @@ func (s *StatusLine) Display() {
 					c = ' '
 					x++
 				}
-				screen.Screen.SetContent(winX+x, y, c, nil, statusLineStyle)
+				screen.SetContent(winX+x, y, c, nil, statusLineStyle)
 			}
 		} else {
-			screen.Screen.SetContent(winX+x, y, ' ', nil, statusLineStyle)
+			screen.SetContent(winX+x, y, ' ', nil, statusLineStyle)
 		}
 	}
 }
--- a/internal/display/tabwindow.go
+++ b/internal/display/tabwindow.go
@@ -91,13 +91,13 @@ func (w *TabWindow) Display() {
 					c = ' '
 				}
 				if x == w.width-1 && !done {
-					screen.Screen.SetContent(w.width-1, w.Y, '>', nil, config.DefStyle.Reverse(true))
+					screen.SetContent(w.width-1, w.Y, '>', nil, config.DefStyle.Reverse(true))
 					x++
 					break
 				} else if x == 0 && w.hscroll > 0 {
-					screen.Screen.SetContent(0, w.Y, '<', nil, config.DefStyle.Reverse(true))
+					screen.SetContent(0, w.Y, '<', nil, config.DefStyle.Reverse(true))
 				} else if x >= 0 && x < w.width {
-					screen.Screen.SetContent(x, w.Y, c, nil, config.DefStyle.Reverse(true))
+					screen.SetContent(x, w.Y, c, nil, config.DefStyle.Reverse(true))
 				}
 				x++
 			}
--- a/internal/display/termwindow.go
+++ b/internal/display/termwindow.go
@@ -51,7 +51,7 @@ func (w *TermWindow) LocFromVisual(vloc buffer.Loc) buffer.Loc {
 func (w *TermWindow) Clear() {
 	for y := 0; y < w.Height; y++ {
 		for x := 0; x < w.Width; x++ {
-			screen.Screen.SetContent(w.X+x, w.Y+y, ' ', nil, config.DefStyle)
+			screen.SetContent(w.X+x, w.Y+y, ' ', nil, config.DefStyle)
 		}
 	}
 }
@@ -88,7 +88,7 @@ func (w *TermWindow) Display() {
 				st = st.Reverse(true)
 			}

-			screen.Screen.SetContent(w.X+x, w.Y+y, c, nil, st)
+			screen.SetContent(w.X+x, w.Y+y, c, nil, st)
 		}
 	}
 	if config.GetGlobalOption("statusline").(bool) {
@@ -103,14 +103,14 @@ func (w *TermWindow) Display() {
 			if x < textLen {
 				r, size := utf8.DecodeRune(text)
 				text = text[size:]
-				screen.Screen.SetContent(w.X+x, w.Y+w.Height, r, nil, statusLineStyle)
+				screen.SetContent(w.X+x, w.Y+w.Height, r, nil, statusLineStyle)
 			} else {
-				screen.Screen.SetContent(w.X+x, w.Y+w.Height, ' ', nil, statusLineStyle)
+				screen.SetContent(w.X+x, w.Y+w.Height, ' ', nil, statusLineStyle)
 			}
 		}
 	}
 	if w.State.CursorVisible() && w.active {
 		curx, cury := w.State.Cursor()
-		screen.Screen.ShowCursor(curx+w.X, cury+w.Y)
+		screen.ShowCursor(curx+w.X, cury+w.Y)
 	}
 }
--- a/internal/display/uiwindow.go
+++ b/internal/display/uiwindow.go
@@ -28,7 +28,7 @@ func (w *UIWindow) drawNode(n *views.Node) {
 		if c.IsLeaf() && c.Kind == views.STVert {
 			if i != len(cs)-1 {
 				for h := 0; h < c.H; h++ {
-					screen.Screen.SetContent(c.X+c.W, c.Y+h, '|', nil, dividerStyle.Reverse(true))
+					screen.SetContent(c.X+c.W, c.Y+h, '|', nil, dividerStyle.Reverse(true))
 				}
 			}
 		} else {
--- a/internal/screen/screen.go
+++ b/internal/screen/screen.go
@@ -6,7 +6,7 @@ import (
 	"sync"

 	"github.com/zyedidia/micro/internal/config"
-	"github.com/zyedidia/micro/pkg/terminfo"
+	"github.com/zyedidia/micro/internal/util"
 	"github.com/zyedidia/tcell"
 )

@@ -17,21 +17,85 @@ import (
 // screen. TODO: maybe we should worry about polling and drawing at the
 // same time too.
 var Screen tcell.Screen
+
+// The lock is necessary since the screen is polled on a separate thread
 var lock sync.Mutex
+
+// DrawChan is a channel that will cause the screen to redraw when
+// written to even if no event user event has occurred
 var DrawChan chan bool

+// Lock locks the screen lock
 func Lock() {
 	lock.Lock()
 }

+// Unlock unlocks the screen lock
 func Unlock() {
 	lock.Unlock()
 }

+// Redraw schedules a redraw with the draw channel
 func Redraw() {
 	DrawChan <- true
 }

+type screenCell struct {
+	x, y  int
+	r     rune
+	combc []rune
+	style tcell.Style
+}
+
+var lastCursor screenCell
+
+// ShowFakeCursor displays a cursor at the given position by modifying the
+// style of the given column instead of actually using the terminal cursor
+// This can be useful in certain terminals such as the windows console where
+// modifying the cursor location is slow and frequent modifications cause flashing
+// This keeps track of the most recent fake cursor location and resets it when
+// a new fake cursor location is specified
+func ShowFakeCursor(x, y int) {
+	r, combc, style, _ := Screen.GetContent(x, y)
+	Screen.SetContent(lastCursor.x, lastCursor.y, lastCursor.r, lastCursor.combc, lastCursor.style)
+	Screen.SetContent(x, y, r, combc, config.DefStyle.Reverse(true))
+
+	lastCursor.x, lastCursor.y = x, y
+	lastCursor.r = r
+	lastCursor.combc = combc
+	lastCursor.style = style
+}
+
+// ShowFakeCursorMulti is the same as ShowFakeCursor except it does not
+// reset previous locations of the cursor
+// Fake cursors are also necessary to display multiple cursors
+func ShowFakeCursorMulti(x, y int) {
+	r, _, _, _ := Screen.GetContent(x, y)
+	Screen.SetContent(x, y, r, nil, config.DefStyle.Reverse(true))
+}
+
+// ShowCursor puts the cursor at the given location using a fake cursor
+// if enabled or using the terminal cursor otherwise
+// By default only the windows console will use a fake cursor
+func ShowCursor(x, y int) {
+	if util.FakeCursor {
+		ShowFakeCursor(x, y)
+	} else {
+		Screen.ShowCursor(x, y)
+	}
+}
+
+// SetContent sets a cell at a point on the screen and makes sure that it is
+// synced with the last cursor location
+func SetContent(x, y int, mainc rune, combc []rune, style tcell.Style) {
+	Screen.SetContent(x, y, mainc, combc, style)
+	if util.FakeCursor && lastCursor.x == x && lastCursor.y == y {
+		lastCursor.r = mainc
+		lastCursor.style = style
+		lastCursor.combc = combc
+	}
+}
+
 // TempFini shuts the screen down temporarily
 func TempFini() bool {
 	screenWasNil := Screen == nil
@@ -59,52 +123,24 @@ func Init() {
 	// Should we enable true color?
 	truecolor := os.Getenv("MICRO_TRUECOLOR") == "1"

-	tcelldb := os.Getenv("TCELLDB")
-	os.Setenv("TCELLDB", config.ConfigDir+"/.tcelldb")
-
-	// In order to enable true color, we have to set the TERM to `xterm-truecolor` when
-	// initializing tcell, but after that, we can set the TERM back to whatever it was
-	oldTerm := os.Getenv("TERM")
-	if truecolor {
-		os.Setenv("TERM", "xterm-truecolor")
+	if !truecolor {
+		os.Setenv("TCELL_TRUECOLOR", "disable")
 	}

 	// Initilize tcell
 	var err error
 	Screen, err = tcell.NewScreen()
 	if err != nil {
-		if err == tcell.ErrTermNotFound {
-			err = terminfo.WriteDB(config.ConfigDir + "/.tcelldb")
-			if err != nil {
-				fmt.Println(err)
-				fmt.Println("Fatal: Micro could not create terminal database file", config.ConfigDir+"/.tcelldb")
-				os.Exit(1)
-			}
-			Screen, err = tcell.NewScreen()
-			if err != nil {
-				fmt.Println(err)
-				fmt.Println("Fatal: Micro could not initialize a Screen.")
-				os.Exit(1)
-			}
-		} else {
-			fmt.Println(err)
-			fmt.Println("Fatal: Micro could not initialize a Screen.")
-			os.Exit(1)
-		}
+		fmt.Println(err)
+		fmt.Println("Fatal: Micro could not initialize a Screen.")
+		os.Exit(1)
 	}
 	if err = Screen.Init(); err != nil {
 		fmt.Println(err)
 		os.Exit(1)
 	}

-	// Now we can put the TERM back to what it was before
-	if truecolor {
-		os.Setenv("TERM", oldTerm)
-	}
-
 	if config.GetGlobalOption("mouse").(bool) {
 		Screen.EnableMouse()
 	}
-
-	os.Setenv("TCELLDB", tcelldb)
 }
--- a/internal/util/util.go
+++ b/internal/util/util.go
@@ -7,6 +7,7 @@ import (
 	"os/user"
 	"path/filepath"
 	"regexp"
+	"runtime"
 	"strconv"
 	"strings"
 	"time"
@@ -30,6 +31,9 @@ var (
 	CompileDate = "Unknown"
 	// Debug logging
 	Debug = "ON"
+	// FakeCursor is used to disable the terminal cursor and have micro
+	// draw its own (enabled for windows consoles where the cursor is slow)
+	FakeCursor = false
 )

 func init() {
@@ -38,6 +42,10 @@ func init() {
 	if err != nil {
 		fmt.Println("Invalid version: ", Version, err)
 	}
+
+	if runtime.GOOS == "windows" {
+		FakeCursor = true
+	}
 }

 // SliceEnd returns a byte slice where the index is a rune index
--- a/pkg/terminfo/LICENSE.md
+++ b/pkg/terminfo/LICENSE.md
@@ -1,203 +0,0 @@
-
-                                 Apache License
-                           Version 2.0, January 2004
-                        http://www.apache.org/licenses/
-
-   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
-
-   1. Definitions.
-
-      "License" shall mean the terms and conditions for use, reproduction,
-      and distribution as defined by Sections 1 through 9 of this document.
-
-      "Licensor" shall mean the copyright owner or entity authorized by
-      the copyright owner that is granting the License.
-
-      "Legal Entity" shall mean the union of the acting entity and all
-      other entities that control, are controlled by, or are under common
-      control with that entity. For the purposes of this definition,
-      "control" means (i) the power, direct or indirect, to cause the
-      direction or management of such entity, whether by contract or
-      otherwise, or (ii) ownership of fifty percent (50%) or more of the
-      outstanding shares, or (iii) beneficial ownership of such entity.
-
-      "You" (or "Your") shall mean an individual or Legal Entity
-      exercising permissions granted by this License.
-
-      "Source" form shall mean the preferred form for making modifications,
-      including but not limited to software source code, documentation
-      source, and configuration files.
-
-      "Object" form shall mean any form resulting from mechanical
-      transformation or translation of a Source form, including but
-      not limited to compiled object code, generated documentation,
-      and conversions to other media types.
-
-      "Work" shall mean the work of authorship, whether in Source or
-      Object form, made available under the License, as indicated by a
-      copyright notice that is included in or attached to the work
-      (an example is provided in the Appendix below).
-
-      "Derivative Works" shall mean any work, whether in Source or Object
-      form, that is based on (or derived from) the Work and for which the
-      editorial revisions, annotations, elaborations, or other modifications
-      represent, as a whole, an original work of authorship. For the purposes
-      of this License, Derivative Works shall not include works that remain
-      separable from, or merely link (or bind by name) to the interfaces of,
-      the Work and Derivative Works thereof.
-
-      "Contribution" shall mean any work of authorship, including
-      the original version of the Work and any modifications or additions
-      to that Work or Derivative Works thereof, that is intentionally
-      submitted to Licensor for inclusion in the Work by the copyright owner
-      or by an individual or Legal Entity authorized to submit on behalf of
-      the copyright owner. For the purposes of this definition, "submitted"
-      means any form of electronic, verbal, or written communication sent
-      to the Licensor or its representatives, including but not limited to
-      communication on electronic mailing lists, source code control systems,
-      and issue tracking systems that are managed by, or on behalf of, the
-      Licensor for the purpose of discussing and improving the Work, but
-      excluding communication that is conspicuously marked or otherwise
-      designated in writing by the copyright owner as "Not a Contribution."
-
-      "Contributor" shall mean Licensor and any individual or Legal Entity
-      on behalf of whom a Contribution has been received by Licensor and
-      subsequently incorporated within the Work.
-
-   2. Grant of Copyright License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      copyright license to reproduce, prepare Derivative Works of,
-      publicly display, publicly perform, sublicense, and distribute the
-      Work and such Derivative Works in Source or Object form.
-
-   3. Grant of Patent License. Subject to the terms and conditions of
-      this License, each Contributor hereby grants to You a perpetual,
-      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
-      (except as stated in this section) patent license to make, have made,
-      use, offer to sell, sell, import, and otherwise transfer the Work,
-      where such license applies only to those patent claims licensable
-      by such Contributor that are necessarily infringed by their
-      Contribution(s) alone or by combination of their Contribution(s)
-      with the Work to which such Contribution(s) was submitted. If You
-      institute patent litigation against any entity (including a
-      cross-claim or counterclaim in a lawsuit) alleging that the Work
-      or a Contribution incorporated within the Work constitutes direct
-      or contributory patent infringement, then any patent licenses
-      granted to You under this License for that Work shall terminate
-      as of the date such litigation is filed.
-
-   4. Redistribution. You may reproduce and distribute copies of the
-      Work or Derivative Works thereof in any medium, with or without
-      modifications, and in Source or Object form, provided that You
-      meet the following conditions:
-
-      (a) You must give any other recipients of the Work or
-          Derivative Works a copy of this License; and
-
-      (b) You must cause any modified files to carry prominent notices
-          stating that You changed the files; and
-
-      (c) You must retain, in the Source form of any Derivative Works
-          that You distribute, all copyright, patent, trademark, and
-          attribution notices from the Source form of the Work,
-          excluding those notices that do not pertain to any part of
-          the Derivative Works; and
-
-      (d) If the Work includes a "NOTICE" text file as part of its
-          distribution, then any Derivative Works that You distribute must
-          include a readable copy of the attribution notices contained
-          within such NOTICE file, excluding those notices that do not
-          pertain to any part of the Derivative Works, in at least one
-          of the following places: within a NOTICE text file distributed
-          as part of the Derivative Works; within the Source form or
-          documentation, if provided along with the Derivative Works; or,
-          within a display generated by the Derivative Works, if and
-          wherever such third-party notices normally appear. The contents
-          of the NOTICE file are for informational purposes only and
-          do not modify the License. You may add Your own attribution
-          notices within Derivative Works that You distribute, alongside
-          or as an addendum to the NOTICE text from the Work, provided
-          that such additional attribution notices cannot be construed
-          as modifying the License.
-
-      You may add Your own copyright statement to Your modifications and
-      may provide additional or different license terms and conditions
-      for use, reproduction, or distribution of Your modifications, or
-      for any such Derivative Works as a whole, provided Your use,
-      reproduction, and distribution of the Work otherwise complies with
-      the conditions stated in this License.
-
-   5. Submission of Contributions. Unless You explicitly state otherwise,
-      any Contribution intentionally submitted for inclusion in the Work
-      by You to the Licensor shall be under the terms and conditions of
-      this License, without any additional terms or conditions.
-      Notwithstanding the above, nothing herein shall supersede or modify
-      the terms of any separate license agreement you may have executed
-      with Licensor regarding such Contributions.
-
-   6. Trademarks. This License does not grant permission to use the trade
-      names, trademarks, service marks, or product names of the Licensor,
-      except as required for reasonable and customary use in describing the
-      origin of the Work and reproducing the content of the NOTICE file.
-
-   7. Disclaimer of Warranty. Unless required by applicable law or
-      agreed to in writing, Licensor provides the Work (and each
-      Contributor provides its Contributions) on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
-      implied, including, without limitation, any warranties or conditions
-      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
-      PARTICULAR PURPOSE. You are solely responsible for determining the
-      appropriateness of using or redistributing the Work and assume any
-      risks associated with Your exercise of permissions under this License.
-
-   8. Limitation of Liability. In no event and under no legal theory,
-      whether in tort (including negligence), contract, or otherwise,
-      unless required by applicable law (such as deliberate and grossly
-      negligent acts) or agreed to in writing, shall any Contributor be
-      liable to You for damages, including any direct, indirect, special,
-      incidental, or consequential damages of any character arising as a
-      result of this License or out of the use or inability to use the
-      Work (including but not limited to damages for loss of goodwill,
-      work stoppage, computer failure or malfunction, or any and all
-      other commercial damages or losses), even if such Contributor
-      has been advised of the possibility of such damages.
-
-   9. Accepting Warranty or Additional Liability. While redistributing
-      the Work or Derivative Works thereof, You may choose to offer,
-      and charge a fee for, acceptance of support, warranty, indemnity,
-      or other liability obligations and/or rights consistent with this
-      License. However, in accepting such obligations, You may act only
-      on Your own behalf and on Your sole responsibility, not on behalf
-      of any other Contributor, and only if You agree to indemnify,
-      defend, and hold each Contributor harmless for any liability
-      incurred by, or claims asserted against, such Contributor by reason
-      of your accepting any such warranty or additional liability.
-
-   END OF TERMS AND CONDITIONS
-
-   APPENDIX: How to apply the Apache License to your work.
-
-      To apply the Apache License to your work, attach the following
-      boilerplate notice, with the fields enclosed by brackets "[]"
-      replaced with your own identifying information. (Don't include
-      the brackets!)  The text should be enclosed in the appropriate
-      comment syntax for the file format. We also recommend that a
-      file or class name and description of purpose be included on the
-      same "printed page" as the copyright notice for easier
-      identification within third-party archives.
-
-   Copyright [yyyy] [name of copyright owner]
-
-   Licensed under the Apache License, Version 2.0 (the "License");
-   you may not use this file except in compliance with the License.
-   You may obtain a copy of the License at
-
-       http://www.apache.org/licenses/LICENSE-2.0
-
-   Unless required by applicable law or agreed to in writing, software
-   distributed under the License is distributed on an "AS IS" BASIS,
-   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-   See the License for the specific language governing permissions and
-   limitations under the License.
-
--- a/pkg/terminfo/README.md
+++ b/pkg/terminfo/README.md
@@ -1,6 +0,0 @@
-# Terminfo parser
-
-This terminfo parser was written by the authors of [tcell](https://github.com/gdamore/tcell). We are using it here
-to compile the terminal database if the terminal entry is not found in set of precompiled terminals.
-
-The source for `mkinfo.go` is adapted from tcell's `mkinfo` tool to be more of a library.
--- a/pkg/terminfo/mkinfo.go
+++ b/pkg/terminfo/mkinfo.go
@@ -1,518 +0,0 @@
-// Copyright 2017 The TCell Authors
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use file except in compliance with the License.
-// You may obtain a copy of the license at
-//
-//    http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-// This command is used to generate suitable configuration files in either
-// go syntax or in JSON.  It defaults to JSON output on stdout.  If no
-// term values are specified on the command line, then $TERM is used.
-//
-// Usage is like this:
-//
-// mkinfo [-init] [-go file.go] [-json file.json] [-quiet] [-nofatal] [<term>...]
-//
-// -gzip     specifies output should be compressed (json only)
-// -go       specifies Go output into the named file.  Use - for stdout.
-// -json     specifies JSON output in the named file.  Use - for stdout
-// -nofatal  indicates that errors loading definitions should not be fatal
-//
-
-package terminfo
-
-import (
-	"bytes"
-	"encoding/json"
-	"errors"
-	"fmt"
-	"io"
-	"os"
-	"os/exec"
-	"regexp"
-	"strconv"
-	"strings"
-)
-
-type termcap struct {
-	name    string
-	desc    string
-	aliases []string
-	bools   map[string]bool
-	nums    map[string]int
-	strs    map[string]string
-}
-
-func (tc *termcap) getnum(s string) int {
-	return (tc.nums[s])
-}
-
-func (tc *termcap) getflag(s string) bool {
-	return (tc.bools[s])
-}
-
-func (tc *termcap) getstr(s string) string {
-	return (tc.strs[s])
-}
-
-const (
-	NONE = iota
-	CTRL
-	ESC
-)
-
-func unescape(s string) string {
-	// Various escapes are in \x format.  Control codes are
-	// encoded as ^M (carat followed by ASCII equivalent).
-	// Escapes are: \e, \E - escape
-	//  \0 NULL, \n \l \r \t \b \f \s for equivalent C escape.
-	buf := &bytes.Buffer{}
-	esc := NONE
-
-	for i := 0; i < len(s); i++ {
-		c := s[i]
-		switch esc {
-		case NONE:
-			switch c {
-			case '\\':
-				esc = ESC
-			case '^':
-				esc = CTRL
-			default:
-				buf.WriteByte(c)
-			}
-		case CTRL:
-			buf.WriteByte(c - 0x40)
-			esc = NONE
-		case ESC:
-			switch c {
-			case 'E', 'e':
-				buf.WriteByte(0x1b)
-			case '0', '1', '2', '3', '4', '5', '6', '7':
-				if i+2 < len(s) && s[i+1] >= '0' && s[i+1] <= '7' && s[i+2] >= '0' && s[i+2] <= '7' {
-					buf.WriteByte(((c - '0') * 64) + ((s[i+1] - '0') * 8) + (s[i+2] - '0'))
-					i = i + 2
-				} else if c == '0' {
-					buf.WriteByte(0)
-				}
-			case 'n':
-				buf.WriteByte('\n')
-			case 'r':
-				buf.WriteByte('\r')
-			case 't':
-				buf.WriteByte('\t')
-			case 'b':
-				buf.WriteByte('\b')
-			case 'f':
-				buf.WriteByte('\f')
-			case 's':
-				buf.WriteByte(' ')
-			case 'l':
-				panic("WTF: weird format: " + s)
-			default:
-				buf.WriteByte(c)
-			}
-			esc = NONE
-		}
-	}
-	return (buf.String())
-}
-
-func (tc *termcap) setupterm(name string) error {
-	cmd := exec.Command("infocmp", "-1", name)
-	output := &bytes.Buffer{}
-	cmd.Stdout = output
-
-	tc.strs = make(map[string]string)
-	tc.bools = make(map[string]bool)
-	tc.nums = make(map[string]int)
-
-	err := cmd.Run()
-	if err != nil {
-		return err
-	}
-
-	// Now parse the output.
-	// We get comment lines (starting with "#"), followed by
-	// a header line that looks like "<name>|<alias>|...|<desc>"
-	// then capabilities, one per line, starting with a tab and ending
-	// with a comma and newline.
-	lines := strings.Split(output.String(), "\n")
-	for len(lines) > 0 && strings.HasPrefix(lines[0], "#") {
-		lines = lines[1:]
-	}
-
-	// Ditch trailing empty last line
-	if lines[len(lines)-1] == "" {
-		lines = lines[:len(lines)-1]
-	}
-	header := lines[0]
-	if strings.HasSuffix(header, ",") {
-		header = header[:len(header)-1]
-	}
-	names := strings.Split(header, "|")
-	tc.name = names[0]
-	names = names[1:]
-	if len(names) > 0 {
-		tc.desc = names[len(names)-1]
-		names = names[:len(names)-1]
-	}
-	tc.aliases = names
-	for _, val := range lines[1:] {
-		if (!strings.HasPrefix(val, "\t")) ||
-			(!strings.HasSuffix(val, ",")) {
-			return (errors.New("malformed infocmp: " + val))
-		}
-
-		val = val[1:]
-		val = val[:len(val)-1]
-
-		if k := strings.SplitN(val, "=", 2); len(k) == 2 {
-			tc.strs[k[0]] = unescape(k[1])
-		} else if k := strings.SplitN(val, "#", 2); len(k) == 2 {
-			if strings.HasPrefix(k[1], "0x") {
-				if u, err := strconv.ParseUint(k[1][2:], 16, 0); err != nil {
-					return (err)
-				} else {
-					tc.nums[k[0]] = int(u)
-				}
-			} else if u, err := strconv.ParseUint(k[1], 10, 0); err != nil {
-				return (err)
-			} else {
-				tc.nums[k[0]] = int(u)
-			}
-		} else {
-			tc.bools[val] = true
-		}
-	}
-	return nil
-}
-
-// This program is used to collect data from the system's terminfo library,
-// and write it into Go source code.  That is, we maintain our terminfo
-// capabilities encoded in the program.  It should never need to be run by
-// an end user, but developers can use this to add codes for additional
-// terminal types.
-//
-// If a terminal name ending with -truecolor is given, and we cannot find
-// one, we will try to fabricate one from either the -256color (if present)
-// or the unadorned base name, adding the XTerm specific 24-bit color
-// escapes.  We believe that all 24-bit capable terminals use the same
-// escape sequences, and terminfo has yet to evolve to support this.
-func getinfo(name string) (*Terminfo, string, error) {
-	var tc termcap
-	addTrueColor := false
-	if err := tc.setupterm(name); err != nil {
-		if strings.HasSuffix(name, "-truecolor") {
-			base := name[:len(name)-len("-truecolor")]
-			// Probably -256color is closest to what we want
-			if err = tc.setupterm(base + "-256color"); err != nil {
-				err = tc.setupterm(base)
-			}
-			if err == nil {
-				addTrueColor = true
-			}
-			tc.name = name
-		}
-		if err != nil {
-			return nil, "", err
-		}
-	}
-	t := &Terminfo{}
-	// If this is an alias record, then just emit the alias
-	t.Name = tc.name
-	if t.Name != name {
-		return t, "", nil
-	}
-	t.Aliases = tc.aliases
-	t.Colors = tc.getnum("colors")
-	t.Columns = tc.getnum("cols")
-	t.Lines = tc.getnum("lines")
-	t.Bell = tc.getstr("bel")
-	t.Clear = tc.getstr("clear")
-	t.EnterCA = tc.getstr("smcup")
-	t.ExitCA = tc.getstr("rmcup")
-	t.ShowCursor = tc.getstr("cnorm")
-	t.HideCursor = tc.getstr("civis")
-	t.AttrOff = tc.getstr("sgr0")
-	t.Underline = tc.getstr("smul")
-	t.Bold = tc.getstr("bold")
-	t.Blink = tc.getstr("blink")
-	t.Dim = tc.getstr("dim")
-	t.Reverse = tc.getstr("rev")
-	t.EnterKeypad = tc.getstr("smkx")
-	t.ExitKeypad = tc.getstr("rmkx")
-	t.SetFg = tc.getstr("setaf")
-	t.SetBg = tc.getstr("setab")
-	t.SetCursor = tc.getstr("cup")
-	t.CursorBack1 = tc.getstr("cub1")
-	t.CursorUp1 = tc.getstr("cuu1")
-	t.KeyF1 = tc.getstr("kf1")
-	t.KeyF2 = tc.getstr("kf2")
-	t.KeyF3 = tc.getstr("kf3")
-	t.KeyF4 = tc.getstr("kf4")
-	t.KeyF5 = tc.getstr("kf5")
-	t.KeyF6 = tc.getstr("kf6")
-	t.KeyF7 = tc.getstr("kf7")
-	t.KeyF8 = tc.getstr("kf8")
-	t.KeyF9 = tc.getstr("kf9")
-	t.KeyF10 = tc.getstr("kf10")
-	t.KeyF11 = tc.getstr("kf11")
-	t.KeyF12 = tc.getstr("kf12")
-	t.KeyF13 = tc.getstr("kf13")
-	t.KeyF14 = tc.getstr("kf14")
-	t.KeyF15 = tc.getstr("kf15")
-	t.KeyF16 = tc.getstr("kf16")
-	t.KeyF17 = tc.getstr("kf17")
-	t.KeyF18 = tc.getstr("kf18")
-	t.KeyF19 = tc.getstr("kf19")
-	t.KeyF20 = tc.getstr("kf20")
-	t.KeyF21 = tc.getstr("kf21")
-	t.KeyF22 = tc.getstr("kf22")
-	t.KeyF23 = tc.getstr("kf23")
-	t.KeyF24 = tc.getstr("kf24")
-	t.KeyF25 = tc.getstr("kf25")
-	t.KeyF26 = tc.getstr("kf26")
-	t.KeyF27 = tc.getstr("kf27")
-	t.KeyF28 = tc.getstr("kf28")
-	t.KeyF29 = tc.getstr("kf29")
-	t.KeyF30 = tc.getstr("kf30")
-	t.KeyF31 = tc.getstr("kf31")
-	t.KeyF32 = tc.getstr("kf32")
-	t.KeyF33 = tc.getstr("kf33")
-	t.KeyF34 = tc.getstr("kf34")
-	t.KeyF35 = tc.getstr("kf35")
-	t.KeyF36 = tc.getstr("kf36")
-	t.KeyF37 = tc.getstr("kf37")
-	t.KeyF38 = tc.getstr("kf38")
-	t.KeyF39 = tc.getstr("kf39")
-	t.KeyF40 = tc.getstr("kf40")
-	t.KeyF41 = tc.getstr("kf41")
-	t.KeyF42 = tc.getstr("kf42")
-	t.KeyF43 = tc.getstr("kf43")
-	t.KeyF44 = tc.getstr("kf44")
-	t.KeyF45 = tc.getstr("kf45")
-	t.KeyF46 = tc.getstr("kf46")
-	t.KeyF47 = tc.getstr("kf47")
-	t.KeyF48 = tc.getstr("kf48")
-	t.KeyF49 = tc.getstr("kf49")
-	t.KeyF50 = tc.getstr("kf50")
-	t.KeyF51 = tc.getstr("kf51")
-	t.KeyF52 = tc.getstr("kf52")
-	t.KeyF53 = tc.getstr("kf53")
-	t.KeyF54 = tc.getstr("kf54")
-	t.KeyF55 = tc.getstr("kf55")
-	t.KeyF56 = tc.getstr("kf56")
-	t.KeyF57 = tc.getstr("kf57")
-	t.KeyF58 = tc.getstr("kf58")
-	t.KeyF59 = tc.getstr("kf59")
-	t.KeyF60 = tc.getstr("kf60")
-	t.KeyF61 = tc.getstr("kf61")
-	t.KeyF62 = tc.getstr("kf62")
-	t.KeyF63 = tc.getstr("kf63")
-	t.KeyF64 = tc.getstr("kf64")
-	t.KeyInsert = tc.getstr("kich1")
-	t.KeyDelete = tc.getstr("kdch1")
-	t.KeyBackspace = tc.getstr("kbs")
-	t.KeyHome = tc.getstr("khome")
-	t.KeyEnd = tc.getstr("kend")
-	t.KeyUp = tc.getstr("kcuu1")
-	t.KeyDown = tc.getstr("kcud1")
-	t.KeyRight = tc.getstr("kcuf1")
-	t.KeyLeft = tc.getstr("kcub1")
-	t.KeyPgDn = tc.getstr("knp")
-	t.KeyPgUp = tc.getstr("kpp")
-	t.KeyBacktab = tc.getstr("kcbt")
-	t.KeyExit = tc.getstr("kext")
-	t.KeyCancel = tc.getstr("kcan")
-	t.KeyPrint = tc.getstr("kprt")
-	t.KeyHelp = tc.getstr("khlp")
-	t.KeyClear = tc.getstr("kclr")
-	t.AltChars = tc.getstr("acsc")
-	t.EnterAcs = tc.getstr("smacs")
-	t.ExitAcs = tc.getstr("rmacs")
-	t.EnableAcs = tc.getstr("enacs")
-	t.Mouse = tc.getstr("kmous")
-	t.KeyShfRight = tc.getstr("kRIT")
-	t.KeyShfLeft = tc.getstr("kLFT")
-	t.KeyShfHome = tc.getstr("kHOM")
-	t.KeyShfEnd = tc.getstr("kEND")
-
-	// Terminfo lacks descriptions for a bunch of modified keys,
-	// but modern XTerm and emulators often have them.  Let's add them,
-	// if the shifted right and left arrows are defined.
-	if t.KeyShfRight == "\x1b[1;2C" && t.KeyShfLeft == "\x1b[1;2D" {
-		t.KeyShfUp = "\x1b[1;2A"
-		t.KeyShfDown = "\x1b[1;2B"
-		t.KeyMetaUp = "\x1b[1;9A"
-		t.KeyMetaDown = "\x1b[1;9B"
-		t.KeyMetaRight = "\x1b[1;9C"
-		t.KeyMetaLeft = "\x1b[1;9D"
-		t.KeyAltUp = "\x1b[1;3A"
-		t.KeyAltDown = "\x1b[1;3B"
-		t.KeyAltRight = "\x1b[1;3C"
-		t.KeyAltLeft = "\x1b[1;3D"
-		t.KeyCtrlUp = "\x1b[1;5A"
-		t.KeyCtrlDown = "\x1b[1;5B"
-		t.KeyCtrlRight = "\x1b[1;5C"
-		t.KeyCtrlLeft = "\x1b[1;5D"
-		t.KeyAltShfUp = "\x1b[1;4A"
-		t.KeyAltShfDown = "\x1b[1;4B"
-		t.KeyAltShfRight = "\x1b[1;4C"
-		t.KeyAltShfLeft = "\x1b[1;4D"
-
-		t.KeyMetaShfUp = "\x1b[1;10A"
-		t.KeyMetaShfDown = "\x1b[1;10B"
-		t.KeyMetaShfRight = "\x1b[1;10C"
-		t.KeyMetaShfLeft = "\x1b[1;10D"
-
-		t.KeyCtrlShfUp = "\x1b[1;6A"
-		t.KeyCtrlShfDown = "\x1b[1;6B"
-		t.KeyCtrlShfRight = "\x1b[1;6C"
-		t.KeyCtrlShfLeft = "\x1b[1;6D"
-	}
-	// And also for Home and End
-	if t.KeyShfHome == "\x1b[1;2H" && t.KeyShfEnd == "\x1b[1;2F" {
-		t.KeyCtrlHome = "\x1b[1;5H"
-		t.KeyCtrlEnd = "\x1b[1;5F"
-		t.KeyAltHome = "\x1b[1;9H"
-		t.KeyAltEnd = "\x1b[1;9F"
-		t.KeyCtrlShfHome = "\x1b[1;6H"
-		t.KeyCtrlShfEnd = "\x1b[1;6F"
-		t.KeyAltShfHome = "\x1b[1;4H"
-		t.KeyAltShfEnd = "\x1b[1;4F"
-		t.KeyMetaShfHome = "\x1b[1;10H"
-		t.KeyMetaShfEnd = "\x1b[1;10F"
-	}
-
-	// And the same thing for rxvt and workalikes (Eterm, aterm, etc.)
-	// It seems that urxvt at least send ESC as ALT prefix for these,
-	// although some places seem to indicate a separate ALT key sesquence.
-	if t.KeyShfRight == "\x1b[c" && t.KeyShfLeft == "\x1b[d" {
-		t.KeyShfUp = "\x1b[a"
-		t.KeyShfDown = "\x1b[b"
-		t.KeyCtrlUp = "\x1b[Oa"
-		t.KeyCtrlDown = "\x1b[Ob"
-		t.KeyCtrlRight = "\x1b[Oc"
-		t.KeyCtrlLeft = "\x1b[Od"
-	}
-	if t.KeyShfHome == "\x1b[7$" && t.KeyShfEnd == "\x1b[8$" {
-		t.KeyCtrlHome = "\x1b[7^"
-		t.KeyCtrlEnd = "\x1b[8^"
-	}
-
-	// If the kmous entry is present, then we need to record the
-	// the codes to enter and exit mouse mode.  Sadly, this is not
-	// part of the terminfo databases anywhere that I've found, but
-	// is an extension.  The escape codes are documented in the XTerm
-	// manual, and all terminals that have kmous are expected to
-	// use these same codes, unless explicitly configured otherwise
-	// vi XM.  Note that in any event, we only known how to parse either
-	// x11 or SGR mouse events -- if your terminal doesn't support one
-	// of these two forms, you maybe out of luck.
-	t.MouseMode = tc.getstr("XM")
-	if t.Mouse != "" && t.MouseMode == "" {
-		// we anticipate that all xterm mouse tracking compatible
-		// terminals understand mouse tracking (1000), but we hope
-		// that those that don't understand any-event tracking (1003)
-		// will at least ignore it.  Likewise we hope that terminals
-		// that don't understand SGR reporting (1006) just ignore it.
-		t.MouseMode = "%?%p1%{1}%=%t%'h'%Pa%e%'l'%Pa%;" +
-			"\x1b[?1000%ga%c\x1b[?1002%ga%c\x1b[?1003%ga%c\x1b[?1006%ga%c"
-	}
-
-	// We only support colors in ANSI 8 or 256 color mode.
-	if t.Colors < 8 || t.SetFg == "" {
-		t.Colors = 0
-	}
-	if t.SetCursor == "" {
-		return nil, "", errors.New("terminal not cursor addressable")
-	}
-
-	// For padding, we lookup the pad char.  If that isn't present,
-	// and npc is *not* set, then we assume a null byte.
-	t.PadChar = tc.getstr("pad")
-	if t.PadChar == "" {
-		if !tc.getflag("npc") {
-			t.PadChar = "\u0000"
-		}
-	}
-
-	// For some terminals we fabricate a -truecolor entry, that may
-	// not exist in terminfo.
-	if addTrueColor {
-		t.SetFgRGB = "\x1b[38;2;%p1%d;%p2%d;%p3%dm"
-		t.SetBgRGB = "\x1b[48;2;%p1%d;%p2%d;%p3%dm"
-		t.SetFgBgRGB = "\x1b[38;2;%p1%d;%p2%d;%p3%d;" +
-			"48;2;%p4%d;%p5%d;%p6%dm"
-	}
-
-	// For terminals that use "standard" SGR sequences, lets combine the
-	// foreground and background together.
-	if strings.HasPrefix(t.SetFg, "\x1b[") &&
-		strings.HasPrefix(t.SetBg, "\x1b[") &&
-		strings.HasSuffix(t.SetFg, "m") &&
-		strings.HasSuffix(t.SetBg, "m") {
-		fg := t.SetFg[:len(t.SetFg)-1]
-		r := regexp.MustCompile("%p1")
-		bg := r.ReplaceAllString(t.SetBg[2:], "%p2")
-		t.SetFgBg = fg + ";" + bg
-	}
-
-	return t, tc.desc, nil
-}
-
-func WriteDB(filename string) error {
-	var e error
-	js := []byte{}
-	args := []string{os.Getenv("TERM")}
-
-	tdata := make(map[string]*Terminfo)
-	descs := make(map[string]string)
-
-	for _, term := range args {
-		if t, desc, e := getinfo(term); e != nil {
-			return e
-		} else {
-			tdata[term] = t
-			descs[term] = desc
-		}
-	}
-
-	if len(tdata) == 0 {
-		// No data.
-		return errors.New("No data")
-	}
-	o := os.Stdout
-	if o, e = os.Create(filename); e != nil {
-		return e
-	}
-	var w io.WriteCloser
-	w = o
-	for _, term := range args {
-		if t := tdata[term]; t != nil {
-			js, e = json.Marshal(t)
-			fmt.Fprintln(w, string(js))
-		}
-		// arguably if there is more than one term, this
-		// should be a javascript array, but that's not how
-		// we load it.  We marshal objects one at a time from
-		// the file.
-	}
-	if e != nil {
-		return e
-	}
-	w.Close()
-	if w != o {
-		o.Close()
-	}
-
-	return nil
-}
--- a/pkg/terminfo/terminfo.go
+++ b/pkg/terminfo/terminfo.go
@@ -1,838 +0,0 @@
-// Copyright 2017 The TCell Authors
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use file except in compliance with the License.
-// You may obtain a copy of the license at
-//
-//    http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-package terminfo
-
-import (
-	"bytes"
-	"compress/gzip"
-	"encoding/json"
-	"errors"
-	"fmt"
-	"io"
-	"os"
-	"path"
-	"strconv"
-	"strings"
-	"sync"
-)
-
-var (
-	// ErrTermNotFound indicates that a suitable terminal entry could
-	// not be found.  This can result from either not having TERM set,
-	// or from the TERM failing to support certain minimal functionality,
-	// in particular absolute cursor addressability (the cup capability)
-	// is required.  For example, legacy "adm3" lacks this capability,
-	// whereas the slightly newer "adm3a" supports it.  This failure
-	// occurs most often with "dumb".
-	ErrTermNotFound = errors.New("terminal entry not found")
-)
-
-// Terminfo represents a terminfo entry.  Note that we use friendly names
-// in Go, but when we write out JSON, we use the same names as terminfo.
-// The name, aliases and smous, rmous fields do not come from terminfo directly.
-type Terminfo struct {
-	Name         string   `json:"name"`
-	Aliases      []string `json:"aliases,omitempty"`
-	Columns      int      `json:"cols,omitempty"`   // cols
-	Lines        int      `json:"lines,omitempty"`  // lines
-	Colors       int      `json:"colors,omitempty"` // colors
-	Bell         string   `json:"bell,omitempty"`   // bell
-	Clear        string   `json:"clear,omitempty"`  // clear
-	EnterCA      string   `json:"smcup,omitempty"`  // smcup
-	ExitCA       string   `json:"rmcup,omitempty"`  // rmcup
-	ShowCursor   string   `json:"cnorm,omitempty"`  // cnorm
-	HideCursor   string   `json:"civis,omitempty"`  // civis
-	AttrOff      string   `json:"sgr0,omitempty"`   // sgr0
-	Underline    string   `json:"smul,omitempty"`   // smul
-	Bold         string   `json:"bold,omitempty"`   // bold
-	Blink        string   `json:"blink,omitempty"`  // blink
-	Reverse      string   `json:"rev,omitempty"`    // rev
-	Dim          string   `json:"dim,omitempty"`    // dim
-	EnterKeypad  string   `json:"smkx,omitempty"`   // smkx
-	ExitKeypad   string   `json:"rmkx,omitempty"`   // rmkx
-	SetFg        string   `json:"setaf,omitempty"`  // setaf
-	SetBg        string   `json:"setbg,omitempty"`  // setab
-	SetCursor    string   `json:"cup,omitempty"`    // cup
-	CursorBack1  string   `json:"cub1,omitempty"`   // cub1
-	CursorUp1    string   `json:"cuu1,omitempty"`   // cuu1
-	PadChar      string   `json:"pad,omitempty"`    // pad
-	KeyBackspace string   `json:"kbs,omitempty"`    // kbs
-	KeyF1        string   `json:"kf1,omitempty"`    // kf1
-	KeyF2        string   `json:"kf2,omitempty"`    // kf2
-	KeyF3        string   `json:"kf3,omitempty"`    // kf3
-	KeyF4        string   `json:"kf4,omitempty"`    // kf4
-	KeyF5        string   `json:"kf5,omitempty"`    // kf5
-	KeyF6        string   `json:"kf6,omitempty"`    // kf6
-	KeyF7        string   `json:"kf7,omitempty"`    // kf7
-	KeyF8        string   `json:"kf8,omitempty"`    // kf8
-	KeyF9        string   `json:"kf9,omitempty"`    // kf9
-	KeyF10       string   `json:"kf10,omitempty"`   // kf10
-	KeyF11       string   `json:"kf11,omitempty"`   // kf11
-	KeyF12       string   `json:"kf12,omitempty"`   // kf12
-	KeyF13       string   `json:"kf13,omitempty"`   // kf13
-	KeyF14       string   `json:"kf14,omitempty"`   // kf14
-	KeyF15       string   `json:"kf15,omitempty"`   // kf15
-	KeyF16       string   `json:"kf16,omitempty"`   // kf16
-	KeyF17       string   `json:"kf17,omitempty"`   // kf17
-	KeyF18       string   `json:"kf18,omitempty"`   // kf18
-	KeyF19       string   `json:"kf19,omitempty"`   // kf19
-	KeyF20       string   `json:"kf20,omitempty"`   // kf20
-	KeyF21       string   `json:"kf21,omitempty"`   // kf21
-	KeyF22       string   `json:"kf22,omitempty"`   // kf22
-	KeyF23       string   `json:"kf23,omitempty"`   // kf23
-	KeyF24       string   `json:"kf24,omitempty"`   // kf24
-	KeyF25       string   `json:"kf25,omitempty"`   // kf25
-	KeyF26       string   `json:"kf26,omitempty"`   // kf26
-	KeyF27       string   `json:"kf27,omitempty"`   // kf27
-	KeyF28       string   `json:"kf28,omitempty"`   // kf28
-	KeyF29       string   `json:"kf29,omitempty"`   // kf29
-	KeyF30       string   `json:"kf30,omitempty"`   // kf30
-	KeyF31       string   `json:"kf31,omitempty"`   // kf31
-	KeyF32       string   `json:"kf32,omitempty"`   // kf32
-	KeyF33       string   `json:"kf33,omitempty"`   // kf33
-	KeyF34       string   `json:"kf34,omitempty"`   // kf34
-	KeyF35       string   `json:"kf35,omitempty"`   // kf35
-	KeyF36       string   `json:"kf36,omitempty"`   // kf36
-	KeyF37       string   `json:"kf37,omitempty"`   // kf37
-	KeyF38       string   `json:"kf38,omitempty"`   // kf38
-	KeyF39       string   `json:"kf39,omitempty"`   // kf39
-	KeyF40       string   `json:"kf40,omitempty"`   // kf40
-	KeyF41       string   `json:"kf41,omitempty"`   // kf41
-	KeyF42       string   `json:"kf42,omitempty"`   // kf42
-	KeyF43       string   `json:"kf43,omitempty"`   // kf43
-	KeyF44       string   `json:"kf44,omitempty"`   // kf44
-	KeyF45       string   `json:"kf45,omitempty"`   // kf45
-	KeyF46       string   `json:"kf46,omitempty"`   // kf46
-	KeyF47       string   `json:"kf47,omitempty"`   // kf47
-	KeyF48       string   `json:"kf48,omitempty"`   // kf48
-	KeyF49       string   `json:"kf49,omitempty"`   // kf49
-	KeyF50       string   `json:"kf50,omitempty"`   // kf50
-	KeyF51       string   `json:"kf51,omitempty"`   // kf51
-	KeyF52       string   `json:"kf52,omitempty"`   // kf52
-	KeyF53       string   `json:"kf53,omitempty"`   // kf53
-	KeyF54       string   `json:"kf54,omitempty"`   // kf54
-	KeyF55       string   `json:"kf55,omitempty"`   // kf55
-	KeyF56       string   `json:"kf56,omitempty"`   // kf56
-	KeyF57       string   `json:"kf57,omitempty"`   // kf57
-	KeyF58       string   `json:"kf58,omitempty"`   // kf58
-	KeyF59       string   `json:"kf59,omitempty"`   // kf59
-	KeyF60       string   `json:"kf60,omitempty"`   // kf60
-	KeyF61       string   `json:"kf61,omitempty"`   // kf61
-	KeyF62       string   `json:"kf62,omitempty"`   // kf62
-	KeyF63       string   `json:"kf63,omitempty"`   // kf63
-	KeyF64       string   `json:"kf64,omitempty"`   // kf64
-	KeyInsert    string   `json:"kich,omitempty"`   // kich1
-	KeyDelete    string   `json:"kdch,omitempty"`   // kdch1
-	KeyHome      string   `json:"khome,omitempty"`  // khome
-	KeyEnd       string   `json:"kend,omitempty"`   // kend
-	KeyHelp      string   `json:"khlp,omitempty"`   // khlp
-	KeyPgUp      string   `json:"kpp,omitempty"`    // kpp
-	KeyPgDn      string   `json:"knp,omitempty"`    // knp
-	KeyUp        string   `json:"kcuu1,omitempty"`  // kcuu1
-	KeyDown      string   `json:"kcud1,omitempty"`  // kcud1
-	KeyLeft      string   `json:"kcub1,omitempty"`  // kcub1
-	KeyRight     string   `json:"kcuf1,omitempty"`  // kcuf1
-	KeyBacktab   string   `json:"kcbt,omitempty"`   // kcbt
-	KeyExit      string   `json:"kext,omitempty"`   // kext
-	KeyClear     string   `json:"kclr,omitempty"`   // kclr
-	KeyPrint     string   `json:"kprt,omitempty"`   // kprt
-	KeyCancel    string   `json:"kcan,omitempty"`   // kcan
-	Mouse        string   `json:"kmous,omitempty"`  // kmous
-	MouseMode    string   `json:"XM,omitempty"`     // XM
-	AltChars     string   `json:"acsc,omitempty"`   // acsc
-	EnterAcs     string   `json:"smacs,omitempty"`  // smacs
-	ExitAcs      string   `json:"rmacs,omitempty"`  // rmacs
-	EnableAcs    string   `json:"enacs,omitempty"`  // enacs
-	KeyShfRight  string   `json:"kRIT,omitempty"`   // kRIT
-	KeyShfLeft   string   `json:"kLFT,omitempty"`   // kLFT
-	KeyShfHome   string   `json:"kHOM,omitempty"`   // kHOM
-	KeyShfEnd    string   `json:"kEND,omitempty"`   // kEND
-
-	// These are non-standard extensions to terminfo.  This includes
-	// true color support, and some additional keys.  Its kind of bizarre
-	// that shifted variants of left and right exist, but not up and down.
-	// Terminal support for these are going to vary amongst XTerm
-	// emulations, so don't depend too much on them in your application.
-
-	SetFgBg         string `json:"_setfgbg,omitempty"`    // setfgbg
-	SetFgBgRGB      string `json:"_setfgbgrgb,omitempty"` // setfgbgrgb
-	SetFgRGB        string `json:"_setfrgb,omitempty"`    // setfrgb
-	SetBgRGB        string `json:"_setbrgb,omitempty"`    // setbrgb
-	KeyShfUp        string `json:"_kscu1,omitempty"`      // shift-up
-	KeyShfDown      string `json:"_kscud1,omitempty"`     // shift-down
-	KeyCtrlUp       string `json:"_kccu1,omitempty"`      // ctrl-up
-	KeyCtrlDown     string `json:"_kccud1,omitempty"`     // ctrl-left
-	KeyCtrlRight    string `json:"_kccuf1,omitempty"`     // ctrl-right
-	KeyCtrlLeft     string `json:"_kccub1,omitempty"`     // ctrl-left
-	KeyMetaUp       string `json:"_kmcu1,omitempty"`      // meta-up
-	KeyMetaDown     string `json:"_kmcud1,omitempty"`     // meta-left
-	KeyMetaRight    string `json:"_kmcuf1,omitempty"`     // meta-right
-	KeyMetaLeft     string `json:"_kmcub1,omitempty"`     // meta-left
-	KeyAltUp        string `json:"_kacu1,omitempty"`      // alt-up
-	KeyAltDown      string `json:"_kacud1,omitempty"`     // alt-left
-	KeyAltRight     string `json:"_kacuf1,omitempty"`     // alt-right
-	KeyAltLeft      string `json:"_kacub1,omitempty"`     // alt-left
-	KeyCtrlHome     string `json:"_kchome,omitempty"`
-	KeyCtrlEnd      string `json:"_kcend,omitempty"`
-	KeyMetaHome     string `json:"_kmhome,omitempty"`
-	KeyMetaEnd      string `json:"_kmend,omitempty"`
-	KeyAltHome      string `json:"_kahome,omitempty"`
-	KeyAltEnd       string `json:"_kaend,omitempty"`
-	KeyAltShfUp     string `json:"_kascu1,omitempty"`
-	KeyAltShfDown   string `json:"_kascud1,omitempty"`
-	KeyAltShfLeft   string `json:"_kascub1,omitempty"`
-	KeyAltShfRight  string `json:"_kascuf1,omitempty"`
-	KeyMetaShfUp    string `json:"_kmscu1,omitempty"`
-	KeyMetaShfDown  string `json:"_kmscud1,omitempty"`
-	KeyMetaShfLeft  string `json:"_kmscub1,omitempty"`
-	KeyMetaShfRight string `json:"_kmscuf1,omitempty"`
-	KeyCtrlShfUp    string `json:"_kcscu1,omitempty"`
-	KeyCtrlShfDown  string `json:"_kcscud1,omitempty"`
-	KeyCtrlShfLeft  string `json:"_kcscub1,omitempty"`
-	KeyCtrlShfRight string `json:"_kcscuf1,omitempty"`
-	KeyCtrlShfHome  string `json:"_kcHOME,omitempty"`
-	KeyCtrlShfEnd   string `json:"_kcEND,omitempty"`
-	KeyAltShfHome   string `json:"_kaHOME,omitempty"`
-	KeyAltShfEnd    string `json:"_kaEND,omitempty"`
-	KeyMetaShfHome  string `json:"_kmHOME,omitempty"`
-	KeyMetaShfEnd   string `json:"_kmEND,omitempty"`
-}
-
-type stackElem struct {
-	s     string
-	i     int
-	isStr bool
-	isInt bool
-}
-
-type stack []stackElem
-
-func (st stack) Push(v string) stack {
-	e := stackElem{
-		s:     v,
-		isStr: true,
-	}
-	return append(st, e)
-}
-
-func (st stack) Pop() (string, stack) {
-	v := ""
-	if len(st) > 0 {
-		e := st[len(st)-1]
-		st = st[:len(st)-1]
-		if e.isStr {
-			v = e.s
-		} else {
-			v = strconv.Itoa(e.i)
-		}
-	}
-	return v, st
-}
-
-func (st stack) PopInt() (int, stack) {
-	if len(st) > 0 {
-		e := st[len(st)-1]
-		st = st[:len(st)-1]
-		if e.isInt {
-			return e.i, st
-		} else if e.isStr {
-			i, _ := strconv.Atoi(e.s)
-			return i, st
-		}
-	}
-	return 0, st
-}
-
-func (st stack) PopBool() (bool, stack) {
-	if len(st) > 0 {
-		e := st[len(st)-1]
-		st = st[:len(st)-1]
-		if e.isStr {
-			if e.s == "1" {
-				return true, st
-			}
-			return false, st
-		} else if e.i == 1 {
-			return true, st
-		} else {
-			return false, st
-		}
-	}
-	return false, st
-}
-
-func (st stack) PushInt(i int) stack {
-	e := stackElem{
-		i:     i,
-		isInt: true,
-	}
-	return append(st, e)
-}
-
-func (st stack) PushBool(i bool) stack {
-	if i {
-		return st.PushInt(1)
-	}
-	return st.PushInt(0)
-}
-
-func nextch(s string, index int) (byte, int) {
-	if index < len(s) {
-		return s[index], index + 1
-	}
-	return 0, index
-}
-
-// static vars
-var svars [26]string
-
-// paramsBuffer handles some persistent state for TParam.  Technically we
-// could probably dispense with this, but caching buffer arrays gives us
-// a nice little performance boost.  Furthermore, we know that TParam is
-// rarely (never?) called re-entrantly, so we can just reuse the same
-// buffers, making it thread-safe by stashing a lock.
-type paramsBuffer struct {
-	out bytes.Buffer
-	buf bytes.Buffer
-	lk  sync.Mutex
-}
-
-// Start initializes the params buffer with the initial string data.
-// It also locks the paramsBuffer.  The caller must call End() when
-// finished.
-func (pb *paramsBuffer) Start(s string) {
-	pb.lk.Lock()
-	pb.out.Reset()
-	pb.buf.Reset()
-	pb.buf.WriteString(s)
-}
-
-// End returns the final output from TParam, but it also releases the lock.
-func (pb *paramsBuffer) End() string {
-	s := pb.out.String()
-	pb.lk.Unlock()
-	return s
-}
-
-// NextCh returns the next input character to the expander.
-func (pb *paramsBuffer) NextCh() (byte, error) {
-	return pb.buf.ReadByte()
-}
-
-// PutCh "emits" (rather schedules for output) a single byte character.
-func (pb *paramsBuffer) PutCh(ch byte) {
-	pb.out.WriteByte(ch)
-}
-
-// PutString schedules a string for output.
-func (pb *paramsBuffer) PutString(s string) {
-	pb.out.WriteString(s)
-}
-
-var pb = &paramsBuffer{}
-
-// TParm takes a terminfo parameterized string, such as setaf or cup, and
-// evaluates the string, and returns the result with the parameter
-// applied.
-func (t *Terminfo) TParm(s string, p ...int) string {
-	var stk stack
-	var a, b string
-	var ai, bi int
-	var ab bool
-	var dvars [26]string
-	var params [9]int
-
-	pb.Start(s)
-
-	// make sure we always have 9 parameters -- makes it easier
-	// later to skip checks
-	for i := 0; i < len(params) && i < len(p); i++ {
-		params[i] = p[i]
-	}
-
-	nest := 0
-
-	for {
-
-		ch, err := pb.NextCh()
-		if err != nil {
-			break
-		}
-
-		if ch != '%' {
-			pb.PutCh(ch)
-			continue
-		}
-
-		ch, err = pb.NextCh()
-		if err != nil {
-			// XXX Error
-			break
-		}
-
-		switch ch {
-		case '%': // quoted %
-			pb.PutCh(ch)
-
-		case 'i': // increment both parameters (ANSI cup support)
-			params[0]++
-			params[1]++
-
-		case 'c', 's':
-			// NB: these, and 'd' below are special cased for
-			// efficiency.  They could be handled by the richer
-			// format support below, less efficiently.
-			a, stk = stk.Pop()
-			pb.PutString(a)
-
-		case 'd':
-			ai, stk = stk.PopInt()
-			pb.PutString(strconv.Itoa(ai))
-
-		case '0', '1', '2', '3', '4', 'x', 'X', 'o', ':':
-			// This is pretty suboptimal, but this is rarely used.
-			// None of the mainstream terminals use any of this,
-			// and it would surprise me if this code is ever
-			// executed outside of test cases.
-			f := "%"
-			if ch == ':' {
-				ch, _ = pb.NextCh()
-			}
-			f += string(ch)
-			for ch == '+' || ch == '-' || ch == '#' || ch == ' ' {
-				ch, _ = pb.NextCh()
-				f += string(ch)
-			}
-			for (ch >= '0' && ch <= '9') || ch == '.' {
-				ch, _ = pb.NextCh()
-				f += string(ch)
-			}
-			switch ch {
-			case 'd', 'x', 'X', 'o':
-				ai, stk = stk.PopInt()
-				pb.PutString(fmt.Sprintf(f, ai))
-			case 'c', 's':
-				a, stk = stk.Pop()
-				pb.PutString(fmt.Sprintf(f, a))
-			}
-
-		case 'p': // push parameter
-			ch, _ = pb.NextCh()
-			ai = int(ch - '1')
-			if ai >= 0 && ai < len(params) {
-				stk = stk.PushInt(params[ai])
-			} else {
-				stk = stk.PushInt(0)
-			}
-
-		case 'P': // pop & store variable
-			ch, _ = pb.NextCh()
-			if ch >= 'A' && ch <= 'Z' {
-				svars[int(ch-'A')], stk = stk.Pop()
-			} else if ch >= 'a' && ch <= 'z' {
-				dvars[int(ch-'a')], stk = stk.Pop()
-			}
-
-		case 'g': // recall & push variable
-			ch, _ = pb.NextCh()
-			if ch >= 'A' && ch <= 'Z' {
-				stk = stk.Push(svars[int(ch-'A')])
-			} else if ch >= 'a' && ch <= 'z' {
-				stk = stk.Push(dvars[int(ch-'a')])
-			}
-
-		case '\'': // push(char)
-			ch, _ = pb.NextCh()
-			pb.NextCh() // must be ' but we don't check
-			stk = stk.Push(string(ch))
-
-		case '{': // push(int)
-			ai = 0
-			ch, _ = pb.NextCh()
-			for ch >= '0' && ch <= '9' {
-				ai *= 10
-				ai += int(ch - '0')
-				ch, _ = pb.NextCh()
-			}
-			// ch must be '}' but no verification
-			stk = stk.PushInt(ai)
-
-		case 'l': // push(strlen(pop))
-			a, stk = stk.Pop()
-			stk = stk.PushInt(len(a))
-
-		case '+':
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai + bi)
-
-		case '-':
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai - bi)
-
-		case '*':
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai * bi)
-
-		case '/':
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			if bi != 0 {
-				stk = stk.PushInt(ai / bi)
-			} else {
-				stk = stk.PushInt(0)
-			}
-
-		case 'm': // push(pop mod pop)
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			if bi != 0 {
-				stk = stk.PushInt(ai % bi)
-			} else {
-				stk = stk.PushInt(0)
-			}
-
-		case '&': // AND
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai & bi)
-
-		case '|': // OR
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai | bi)
-
-		case '^': // XOR
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai ^ bi)
-
-		case '~': // bit complement
-			ai, stk = stk.PopInt()
-			stk = stk.PushInt(ai ^ -1)
-
-		case '!': // logical NOT
-			ai, stk = stk.PopInt()
-			stk = stk.PushBool(ai != 0)
-
-		case '=': // numeric compare or string compare
-			b, stk = stk.Pop()
-			a, stk = stk.Pop()
-			stk = stk.PushBool(a == b)
-
-		case '>': // greater than, numeric
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushBool(ai > bi)
-
-		case '<': // less than, numeric
-			bi, stk = stk.PopInt()
-			ai, stk = stk.PopInt()
-			stk = stk.PushBool(ai < bi)
-
-		case '?': // start conditional
-
-		case 't':
-			ab, stk = stk.PopBool()
-			if ab {
-				// just keep going
-				break
-			}
-			nest = 0
-		ifloop:
-			// this loop consumes everything until we hit our else,
-			// or the end of the conditional
-			for {
-				ch, err = pb.NextCh()
-				if err != nil {
-					break
-				}
-				if ch != '%' {
-					continue
-				}
-				ch, _ = pb.NextCh()
-				switch ch {
-				case ';':
-					if nest == 0 {
-						break ifloop
-					}
-					nest--
-				case '?':
-					nest++
-				case 'e':
-					if nest == 0 {
-						break ifloop
-					}
-				}
-			}
-
-		case 'e':
-			// if we got here, it means we didn't use the else
-			// in the 't' case above, and we should skip until
-			// the end of the conditional
-			nest = 0
-		elloop:
-			for {
-				ch, err = pb.NextCh()
-				if err != nil {
-					break
-				}
-				if ch != '%' {
-					continue
-				}
-				ch, _ = pb.NextCh()
-				switch ch {
-				case ';':
-					if nest == 0 {
-						break elloop
-					}
-					nest--
-				case '?':
-					nest++
-				}
-			}
-
-		case ';': // endif
-
-		}
-	}
-
-	return pb.End()
-}
-
-// TPuts emits the string to the writer, but expands inline padding
-// indications (of the form $<[delay]> where [delay] is msec) to
-// a suitable number of padding characters (usually null bytes) based
-// upon the supplied baud.  At high baud rates, more padding characters
-// will be inserted.  All Terminfo based strings should be emitted using
-// this function.
-func (t *Terminfo) TPuts(w io.Writer, s string, baud int) {
-	for {
-		beg := strings.Index(s, "$<")
-		if beg < 0 {
-			// Most strings don't need padding, which is good news!
-			io.WriteString(w, s)
-			return
-		}
-		io.WriteString(w, s[:beg])
-		s = s[beg+2:]
-		end := strings.Index(s, ">")
-		if end < 0 {
-			// unterminated.. just emit bytes unadulterated
-			io.WriteString(w, "$<"+s)
-			return
-		}
-		val := s[:end]
-		s = s[end+1:]
-		padus := 0
-		unit := 1000
-		dot := false
-	loop:
-		for i := range val {
-			switch val[i] {
-			case '0', '1', '2', '3', '4', '5', '6', '7', '8', '9':
-				padus *= 10
-				padus += int(val[i] - '0')
-				if dot {
-					unit *= 10
-				}
-			case '.':
-				if !dot {
-					dot = true
-				} else {
-					break loop
-				}
-			default:
-				break loop
-			}
-		}
-		cnt := int(((baud / 8) * padus) / unit)
-		for cnt > 0 {
-			io.WriteString(w, t.PadChar)
-			cnt--
-		}
-	}
-}
-
-// TGoto returns a string suitable for addressing the cursor at the given
-// row and column.  The origin 0, 0 is in the upper left corner of the screen.
-func (t *Terminfo) TGoto(col, row int) string {
-	return t.TParm(t.SetCursor, row, col)
-}
-
-// TColor returns a string corresponding to the given foreground and background
-// colors.  Either fg or bg can be set to -1 to elide.
-func (t *Terminfo) TColor(fi, bi int) string {
-	rv := ""
-	// As a special case, we map bright colors to lower versions if the
-	// color table only holds 8.  For the remaining 240 colors, the user
-	// is out of luck.  Someday we could create a mapping table, but its
-	// not worth it.
-	if t.Colors == 8 {
-		if fi > 7 && fi < 16 {
-			fi -= 8
-		}
-		if bi > 7 && bi < 16 {
-			bi -= 8
-		}
-	}
-	if t.Colors > fi && fi >= 0 {
-		rv += t.TParm(t.SetFg, fi)
-	}
-	if t.Colors > bi && bi >= 0 {
-		rv += t.TParm(t.SetBg, bi)
-	}
-	return rv
-}
-
-var (
-	dblock    sync.Mutex
-	terminfos = make(map[string]*Terminfo)
-	aliases   = make(map[string]string)
-)
-
-// AddTerminfo can be called to register a new Terminfo entry.
-func AddTerminfo(t *Terminfo) {
-	dblock.Lock()
-	terminfos[t.Name] = t
-	for _, x := range t.Aliases {
-		terminfos[x] = t
-	}
-	dblock.Unlock()
-}
-
-func loadFromFile(fname string, term string) (*Terminfo, error) {
-	var e error
-	var f io.ReadCloser
-	if f, e = os.Open(fname); e != nil {
-		return nil, e
-	}
-	defer f.Close()
-	if strings.HasSuffix(fname, ".gz") {
-		if f, e = gzip.NewReader(f); e != nil {
-			return nil, e
-		}
-	}
-	d := json.NewDecoder(f)
-	for {
-		t := &Terminfo{}
-		if e := d.Decode(t); e != nil {
-			if e == io.EOF {
-				return nil, ErrTermNotFound
-			}
-			return nil, e
-		}
-		if t.SetCursor == "" {
-			// This must be an alias record, return it.
-			return t, nil
-		}
-		if t.Name == term {
-			return t, nil
-		}
-		for _, a := range t.Aliases {
-			if a == term {
-				return t, nil
-			}
-		}
-	}
-}
-
-// LookupTerminfo attempts to find a definition for the named $TERM.
-// It first looks in the builtin database, which should cover just about
-// everyone.  If it can't find one there, then it will attempt to read
-// one from the JSON file located in either $TCELLDB, $HOME/.tcelldb
-// or in this package's source directory as database.json).
-func LookupTerminfo(name string) (*Terminfo, error) {
-	if name == "" {
-		// else on windows: index out of bounds
-		// on the name[0] reference below
-		return nil, ErrTermNotFound
-	}
-
-	dblock.Lock()
-	t := terminfos[name]
-	dblock.Unlock()
-
-	if t == nil {
-
-		var files []string
-		letter := fmt.Sprintf("%02x", name[0])
-		gzfile := path.Join(letter, name+".gz")
-		jsfile := path.Join(letter, name)
-
-		// Build up the search path.  Old versions of tcell used a
-		// single database file, whereas the new ones locate them
-		// in JSON (optionally compressed) files.
-		//
-		// The search path looks like:
-		//
-		// $TCELLDB/x/xterm.gz
-		// $TCELLDB/x/xterm
-		// $TCELLDB
-		// $HOME/.tcelldb/x/xterm.gz
-		// $HOME/.tcelldb/x/xterm
-		// $HOME/.tcelldb
-		// $GOPATH/terminfo/database/x/xterm.gz
-		// $GOPATH/terminfo/database/x/xterm
-		//
-		if pth := os.Getenv("TCELLDB"); pth != "" {
-			files = append(files, path.Join(pth, gzfile))
-			files = append(files, path.Join(pth, jsfile))
-			files = append(files, pth)
-		}
-		if pth := os.Getenv("HOME"); pth != "" {
-			pth = path.Join(pth, ".tcelldb")
-			files = append(files, path.Join(pth, gzfile))
-			files = append(files, path.Join(pth, jsfile))
-			files = append(files, pth)
-		}
-
-		for _, pth := range strings.Split(os.Getenv("GOPATH"), string(os.PathListSeparator)) {
-			pth = path.Join(pth, "src", "github.com", "gdamore", "tcell", "terminfo", "database")
-			files = append(files, path.Join(pth, gzfile))
-			files = append(files, path.Join(pth, jsfile))
-		}
-
-		for _, fname := range files {
-			t, _ = loadFromFile(fname, name)
-			if t != nil {
-				break
-			}
-		}
-		if t != nil {
-			if t.Name != name {
-				// Check for a database loop (no infinite
-				// recursion).
-				dblock.Lock()
-				if aliases[name] != "" {
-					dblock.Unlock()
-					return nil, ErrTermNotFound
-				}
-				aliases[name] = t.Name
-				dblock.Unlock()
-				return LookupTerminfo(t.Name)
-			}
-			dblock.Lock()
-			terminfos[name] = t
-			dblock.Unlock()
-		}
-	}
-	if t == nil {
-		return nil, ErrTermNotFound
-	}
-	return t, nil
-}
--- a/runtime/syntax/syntax_checker.go
+++ b/runtime/syntax/syntax_checker.go
@@ -5,7 +5,7 @@ import (
 	"io/ioutil"
 	"strings"

-	"github.com/zyedidia/micro/cmd/micro/highlight"
+	"github.com/zyedidia/highlight"
 )

 func main() {
--- a/tools/nightly-release.sh
+++ b/tools/nightly-release.sh
@@ -25,7 +25,7 @@ github-release release \
    --repo micro \
    --tag nightly \
    --name "Nightly build" \
-    --description "Autogenerated nightly build of micro" \
+    --description "Autogenerated nightly build of micro. If you don't see anything here that probably means it's building right now!" \
    --pre-release

 echo "Cross compiling binaries"
Author	SHA1	Message	Date
Zachary Yedidia	6d0128059b	Finish support for a fake cursor	2020-01-01 22:40:51 -05:00
Zachary Yedidia	d6dd838abd	Better support for fake cursor	2020-01-01 21:29:18 -05:00
Zachary Yedidia	938fb7983a	Remove no longer necessary terminfo package	2020-01-01 20:58:01 -05:00
Zachary Yedidia	d9e262c394	Use fake cursor for windows	2020-01-01 20:47:05 -05:00
Zachary Yedidia	e98be1a1e5	Update deps	2020-01-01 20:44:45 -05:00
Zachary Yedidia	41fe7d090e	Update tcell Ref #1447	2020-01-01 18:24:39 -05:00
Zachary Yedidia	aadf5b40ec	Update tcell This update includes a fix for screen flashing on Windows. Fixes #1447	2020-01-01 17:57:16 -05:00
Zachary Yedidia	ebf6d69f26	Update building from source info	2020-01-01 17:41:59 -05:00
Zachary Yedidia	ebf616399e	Update tcell	2020-01-01 17:26:49 -05:00
Zachary Yedidia	08708f79bf	Update tcell	2020-01-01 17:16:18 -05:00
Zachary Yedidia	d7b39fe7a5	Disable true color by default	2019-12-31 23:09:33 -05:00
Zachary Yedidia	48ace1c530	Add extra nightly release message	2019-12-31 22:49:21 -05:00
Zachary Yedidia	fde1cc563f	Update tcell	2019-12-31 22:46:30 -05:00
Zachary Yedidia	abf07a8357	Update runtime	2019-12-31 22:42:35 -05:00